Skip to main content
ubuntuask.com

Back to all posts

How to Configure Power Settings on A Windows Laptop?

Published on
6 min read

Table of Contents

Show more
How to Configure Power Settings on A Windows Laptop? image

Configuring power settings on a Windows laptop allows you to make adjustments to optimize battery life and power usage according to your needs. To configure power settings on your Windows laptop, follow these steps:

  1. Open the Control Panel: Press the Windows key on your keyboard and type "Control Panel." Click on the Control Panel app to open it.
  2. Access Power Options: In the Control Panel window, locate the Power Options icon and click on it.
  3. Choose a Power Plan: On the Power Options window, you will see different power plans like Balanced, Power Saver, and High Performance. Click on the plan you want to configure, or create a new plan by clicking on "Create a power plan" on the left-hand side of the window.
  4. Adjust Power Plan Settings: After selecting a power plan, click on "Change plan settings" to modify the settings for the selected plan.
  5. Adjust Power Options: In the next window, you can adjust various power options such as display brightness, screen timeout, sleep mode, and more. Click on any setting you want to modify and select the desired value or time limit.
  6. Customize Advanced Power Settings: To access more advanced power settings, click on "Change advanced power settings" at the bottom of the window. This opens a new window where you can tweak detailed settings related to your laptop's power usage behavior.
  7. Modify Advanced Power Settings: The Advanced Power Settings window provides options to adjust power settings for different components like the processor, hard drive, USB devices, and more. Expand the sections to modify specific settings, such as minimum and maximum processor state, USB selective suspend, and hard disk power-down options.
  8. Apply Changes: Once you have made the desired adjustments, click on the "Apply" button, followed by "OK," to save the changes and exit the window.

By configuring your power settings, you can extend your laptop's battery life, reduce power consumption, or optimize performance based on your requirements. Remember, the exact options and settings may vary slightly depending on your Windows version and laptop make.

How to customize power plans on a Windows laptop?

To customize power plans on a Windows laptop, follow these steps:

  1. Open the Control Panel by searching for it in the Windows search bar.
  2. In the Control Panel, click on "Hardware and Sound" and then select "Power Options."
  3. In the Power Options window, you'll see the pre-configured power plans available on your laptop, such as Balanced, Power Saver, and High Performance.
  4. To customize a power plan, click on "Change plan settings" next to the plan you want to modify.
  5. In the next window, you can adjust various settings specific to the power plan you selected, such as the display and sleep settings.
  6. Click on "Change advanced power settings" to further customize the power plan.
  7. The Power Options dialog box will appear, showing an extensive list of power settings that you can modify. Expand each category and adjust the settings as per your requirements. Some common options include processor power management, hard disk, USB settings, and more.
  8. Once you have made the desired changes, click on "Apply" and then "OK" to save the settings.
  9. You can create new power plans by clicking on "Create a power plan" on the Power Options page. This will allow you to configure power settings from scratch.
  10. To switch between power plans, return to the Power Options window and select the plan of your choice.

Note: The availability of certain power settings may depend on your laptop's hardware and Windows version.

How to check the battery health on a Windows laptop?

To check the battery health on a Windows laptop, you can follow these steps:

  1. Open the Start Menu and search for "cmd" (Command Prompt).
  2. Right-click on "Command Prompt" and select "Run as administrator". This will open the Command Prompt with administrative privileges.
  3. In the Command Prompt window, type the following command and press Enter: powercfg /batteryreport
  4. After running the command, you will see a message stating that the battery report is being generated. The report will be saved as an HTML file at the location specified (usually in the system directory).
  5. To access the battery report, open the File Explorer and navigate to the specified location where the report was saved.
  6. Find the battery report file (usually named "battery-report.html") and open it using a web browser.
  7. The battery report will provide detailed information about your laptop's battery health, including its capacity, usage history, and other relevant data.

By reviewing the battery report, you can determine the overall health and condition of your laptop's battery.

How to change power button behavior on a Windows laptop?

To change the power button behavior on a Windows laptop, follow these steps:

  1. Open the Start menu and click on the "Settings" gear icon.
  2. In the Settings window, select "System" and then click on "Power & Sleep" from the left-hand menu.
  3. Scroll down in the right-hand pane and click on the "Additional power settings" link under the "Related settings" section.
  4. In the Power Options window, you will see a list of power plans. Next to the plan you are currently using, click on the "Change plan settings" link.
  5. On the next screen, click on the "Change advanced power settings" link.
  6. In the Advanced settings window, scroll down until you find the "Power buttons and lid" section. Expand it by clicking on the plus sign (+) next to it.
  7. You will see options for "Power button action" and "Lid close action". Click on the drop-down menus next to these options to change the behavior. For the power button, you can choose from options like "Sleep", "Hibernate", "Shut down", or "Do nothing". For the lid close action, you can choose actions such as "Sleep", "Hibernate", "Shut down", "Do nothing", or "Turn off the display".
  8. Once you have selected your desired behavior, click "Apply" and then "OK" to save the changes.
  9. You can now close the Power Options window and the Settings window.

The power button behavior on your Windows laptop will now be customized according to your preferences.