How to Reset Files With Only Whitespace Changes In Git?

9 minutes read

To reset files with only whitespace changes in Git, you can use the "git checkout --ignore-space-at-eol" command followed by the path to the file you want to reset. This command will disregard whitespace changes and revert the file to its original state.


If you want to reset all files with only whitespace changes, you can use the "git add -u" command to stage the changes and then run "git checkout --ignore-space-at-eol ." to reset all files in the repository.


Alternatively, you can also use the "git stash --keep-index" command to stash the changes and then pop the stash using the "git stash pop" command. This will remove the whitespace changes and revert the files to their original state.

Best Git Books to Read in October 2024

1
Version Control with Git: Powerful Tools and Techniques for Collaborative Software Development

Rating is 5 out of 5

Version Control with Git: Powerful Tools and Techniques for Collaborative Software Development

2
Learning Git: A Hands-On and Visual Guide to the Basics of Git

Rating is 4.9 out of 5

Learning Git: A Hands-On and Visual Guide to the Basics of Git

3
Git Essentials: Developer's Guide to Git

Rating is 4.8 out of 5

Git Essentials: Developer's Guide to Git

4
Git: Project Management for Developers and DevOps

Rating is 4.7 out of 5

Git: Project Management for Developers and DevOps

5
Head First Git: A Learner's Guide to Understanding Git from the Inside Out

Rating is 4.6 out of 5

Head First Git: A Learner's Guide to Understanding Git from the Inside Out

6
Pro Git

Rating is 4.5 out of 5

Pro Git

7
Git Pocket Guide: A Working Introduction

Rating is 4.4 out of 5

Git Pocket Guide: A Working Introduction


How to remove whitespace changes from files in git?

To remove whitespace changes from files in Git, you can use the git diff command with the --ignore-space-change or --ignore-all-space option. Here's how you can do it:

  1. Open your terminal or Git bash.
  2. Use the following command to view the changes that have whitespace differences:
1
git diff


  1. To remove just changes in whitespace, use the --ignore-space-change option:
1
git diff --ignore-space-change


  1. To remove all whitespace changes (including line endings), use the --ignore-all-space option:
1
git diff --ignore-all-space


  1. If you want to apply the changes and stage the files without whitespace differences, you can use the git apply command with the --ignore-space-change or --ignore-all-space option:
1
git apply --ignore-space-change


Or

1
git apply --ignore-all-space


  1. Finally, commit your changes using the git commit command.


Please note that these commands will only remove whitespace changes from the current working tree and will not modify the commit history.


What is the best way to reset files with whitespace changes in git?

One of the best ways to reset files with whitespace changes in git is to use the git add --patch command. This command allows you to interactively stage changes, including whitespace changes, and reset them if needed. Here's how you can do it:

  1. Use the git status command to see which files have whitespace changes.
  2. Use the git add --patch command to interactively stage changes in a specific file. This will allow you to see the whitespace changes and choose which ones to stage.
  3. Use the git checkout -- command to reset the whitespace changes in the file if needed.
  4. Alternatively, you can use the git checkout --patch command to interactively reset changes in a specific file.


By using these commands, you can easily manage whitespace changes in your files and reset them as needed in git.


How can I revert whitespace changes in git?

To revert whitespace changes in git, you can use the git checkout command along with the --whitespace=fix flag. This flag will revert any whitespace changes in the specified file or directory.


Here's an example:

1
git checkout --whitespace=fix path/to/file


This will revert any whitespace changes in the specified file. If you want to revert whitespace changes in multiple files or directories, you can use wildcards, for example:

1
git checkout --whitespace=fix .


This command will revert whitespace changes in all files and directories in the current working directory.


Alternatively, you can also use the git reset command to revert whitespace changes:

1
git reset --hard


This will reset the working directory to the last commit, effectively reverting any whitespace changes that have been made.


Remember to use these commands with caution, as they will permanently remove any changes that have been made to whitespace in the specified files. Make sure to backup any important changes before using these commands.


What is the correct git command to reset whitespace changes in files?

The correct git command to reset whitespace changes in files is:

1
2
git diff --ignore-all-space > patchfile
git apply --whitespace=nowarn patchfile



How to reset files in git with only whitespace changes?

To reset files in Git with only whitespace changes, you can use the git checkout --ignore-space-at-eol command.


Here's a step-by-step guide on how to reset files with whitespace changes in Git:

  1. Open your terminal or command prompt.
  2. Navigate to the repository where the files with whitespace changes are located.
  3. Check the status of the files in the repository by running the command git status. This will show you the files that have whitespace changes.
  4. Run the following command to reset files with whitespace changes: git checkout --ignore-space-at-eol Replace with the actual name of the file you want to reset.
  5. After running the command, the file will be reset to the last commit without whitespace changes.
  6. If you want to reset multiple files with whitespace changes, you can specify multiple filenames in the command as follows: git checkout --ignore-space-at-eol ...
  7. Once you have reset the files, you can check the status again by running git status to see that the whitespace changes have been removed.


Remember to always use caution when resetting files, as this action cannot be undone without potentially losing changes. It's a good practice to make a backup of your changes or commit them before resetting files.


How to reset files with whitespace changes but keep other modifications?

To reset files with only whitespace changes but keep other modifications, you can use the git checkout command followed by the --patch option.

  1. Run git status to see the list of modified files in your repository.
  2. Identify the files with whitespace changes that you want to reset while keeping other modifications.
  3. Use the following command to reset files with whitespace changes:
1
git checkout --patch <file>


Replace <file> with the name of the file you want to reset. This will interactively prompt you to choose which changes to keep and which changes to discard. You can choose to discard the whitespace changes while keeping other modifications.

  1. Repeat the above steps for any other files with whitespace changes that you want to reset.


After running the git checkout --patch command, the specified files will be reset to their state before the whitespace changes were made, but all other modifications will be retained.

Facebook Twitter LinkedIn Telegram Whatsapp Pocket

Related Posts:

If you want to remove old committed changes in Git, you can do so using the git revert or git reset command.If you want to remove a specific commit, you can use the git revert command. This will create a new commit that undoes the changes made in the specified...
To unstage files with no changes in Git, you can use the command &#34;git reset &#34;. This command will remove the file from the staging area, but it will keep the changes in your working directory. If you want to completely remove the changes and ignore them...
If you have changes in your Git working directory that you have either staged or discarded, you can use the git checkout command to revert back those changes.To revert back discarded changes, first run git status to see the files with changes. Then, you can us...
To revert a Git branch with all commits, you can use the git reset command along with the --hard option. This will effectively reset the branch to the commit you specify, removing all commits after that point.First, identify the commit you want to revert back ...
To rollback from the last commit in Git, you can use the &#34;git reset&#34; command. This command allows you to move the HEAD pointer to a previous commit, effectively undoing the last commit. You can use the &#34;git reset --soft HEAD~1&#34; command to rollb...
To remove submodule changes from a git commit, you can first navigate to the directory of the submodule and reset it to the commit you want by using the command &#34;git reset --hard &#34;. Then, navigate back to the main repository and amend the commit by usi...